Two-row 10-pin terminal block TB1210 is used to connect to the button/switch interface of the Automation Panel 9xD and to the intes of rfacevarious interface options.

Certifications
CE	Yes
UKCA	Yes
UL	cULus E115267 Industrial control equipment
HazLoc	cULus HazLoc E180196 Industrial control equipment for hazardous locations Class I, Division 2, Groups ABCD, T4
DNV	Temperature: B(0 to 55°C) Humidity: B(up to 100%) Vibration: A(0.7 g) EMC: B(bridge and open deck)
LR	ENV3
KR	Yes
ABS	Yes
BV	EC31B Temperature: 5 - 55°C Vibration: 0.7 g EMC: Bridge and open deck
EAC	Yes

Terminal block

Note	Nominal data per UL
Number of pins	10 (female)
Type of terminal block	Push-in spring connection
Cable type	Only copper wires (no aluminum wires!)
Pitch	3.5 mm
Connection cross section
AWG wire	26 to 16 AWG
Wire end sleeves with plastic covering	0.14 to 1 mm²
Single-wire	0.14 to 1.5 mm²
Fine-stranded wires	0.14 to 1.5 mm²
With wire end sleeves	0.14 to 1.5 mm²

Electrical properties

Nominal voltage	300 V
Nominal current	10 A

Operating conditions

Pollution degree per EN 61131-2	Pollution degree 2

B&R 0TB1210.3100 Connector 3.5 10p clamp

PLC Interface Module

B&R PLC Module

Allen Bradley PLC Module

Beckhoff PLC Modules

Georg Fischer Piping System

Bently Nevada Extension Cable

Honeywell Automation Module

SICK Laser Sensor

Harting Connector Han

Phoenix Contact Housing

Hokuyo Laser Sensor

Yokogawa Module

Keyence Vision Systems

Euchner Safety Switch

IFM Pressure Sensor

Foxboro DCS System

B&R 0TB1210.3100 Connector 3.5 10p clamp

MATERIAL NUMBER:

DESCRIPTION:

Terminal block

Electrical properties

Operating conditions

dn150 pipe clamp

pl 259 connector

rj11 4p4c connector