Xiamen ZhiCheng Automation Technology Co., Ltd
Xiamen ZhiCheng Automation Technology Co., Ltd
Add to Cart
Design and Connectivity Features
The ACOPOS servo drive, identified by the material number 8V1016.00 - 2, adopts a modular mechanical design. This design incorporates plug - in modules, which offer great convenience in industrial settings. For maintenance teams, replacing components becomes a straightforward task, minimizing system downtime. All connections are made through plug - in connectors, simplifying the installation process. This not only speeds up the setup but also allows for easy reconfiguration as per the evolving requirements of industrial applications.
Integrated Functional Elements
This servo drive comes equipped with several integrated features that enhance its performance. An integrated line filter is present, which plays a crucial role in reducing electrical noise and interference. By ensuring a clean power supply, it promotes stable operation of the drive and the connected machinery. Additionally, it has an integrated braking resistor. This component is essential for safely dissipating excess energy during the deceleration of the servo motor, thus improving the overall safety and efficiency of the system.
Power and Safety Attributes
Designed for a 3 - phase 400 - 480 V input, the 8V1016.00 - 2 servo drive has a current capacity of 1.6 A and a power rating of 0.7 kW. It also includes a DC bus power supply unit. One of the significant safety features is the integrated electronic restart inhibit. In industrial environments, unexpected restarts can pose serious risks. This feature acts as a safeguard, preventing unplanned restarts and protecting both the equipment and the operators from potential hazards.
|
Attribute
|
Details
|
|
General Information
|
|
|
Model Number
|
8V1016.00 - 2
|
|
Brand
|
B&R
|
|
Product Type
|
ACOPOS Servo Drive
|
|
Product Lifecycle
|
Active
|
|
Power Specifications
|
|
|
Input Voltage
|
3 - phase 400 - 480 V, ± 10% tolerance
|
|
Current Capacity
|
1.6 Aeff (continuous), 5 Aeff (peak)
|
|
Power Rating
|
0.7 kW
|
|
DC Bus Capacitance
|
165 µF
|
|
Mains Input Voltage Frequency
|
50 / 60 Hz ± 4%
|
|
Max. Inrush Current
|
2 A (at 400 VAC)
|
|
Installed Load
|
Max. 2.1 kVA
|
|
Permissible Network Configurations
|
TT, TN
|
|
Switch - on Interval
|
> 10 s
|
|
Mechanical Design
|
|
|
Design Type
|
Modular mechanical design with plug - in modules
|
|
Mounting Orientations
|
Horizontal (face up) - Yes; Standing horizontally - No; Hanging vertically - Yes
|
|
Dimensions (Width x Depth x Height)
|
58.5 mm x 220 mm x 257 mm
|
|
Weight
|
2.5 kg
|
|
Installation Elevation
|
Nominal: 0 - 500 m; Maximum: 2000 m
|
|
Terminal Connection Cross - section (Flexible and Fine - stranded Wires with Wire End Sleeves)
|
0.25 - 4 mm²
|
|
Terminal Connection Cross - section (UL/c - UL - US Approbation)
|
30 - 10 AWG
|
|
Terminal Connection Cross - section (CSA Approbation)
|
28 - 10 AWG
|
|
Connectivity
|
|
|
Motor Connection Cable Length
|
Max. 15 m
|
|
Slots for Plug - in Modules
|
3
|
|
Compatibility
|
Compatible with encoder, sensor, and actuator - supporting plug - in modules
|
|
Integrated Features
|
|
|
Line Filter
|
Integrated (per EN 61800 - 3, category C3)
|
|
Braking Resistor
|
Integrated
|
|
Safety Features
|
|
|
Electronic Restart Inhibit
|
Integrated
|
|
Overload Protection
|
Yes
|
|
Short - circuit and Ground Fault Protection
|
Yes
|
|
Pollution Degree (per EN 61800 - 5 - 1)
|
2 (non - conductive pollution)
|
|
Overvoltage Category (per EN 61800 - 5 - 1)
|
II
|
|
Electrical Characteristics
|
|
|
Nominal Switching Frequency
|
10 kHz
|
|
Possible Switching Frequencies
|
5 / 10 / 20 kHz
|
|
Max. Output Frequency
|
598 Hz
|
|
Response Threshold for Open - circuit Monitoring
|
Approx. 245 mA
|
|
Insulation Stress of Connected Motor (per IEC TS 60034 - 25:2004)
|
Limit value curve A
|
|
Input Voltage (Nominal)
|
24 VDC + 25% / - 20%
|
|
Input Voltage (Maximum)
|
30 VDC
|
|
Input Current at Nominal Voltage
|
Approx. 4 mA
|
|
Input Capacitance
|
5600 µF
|
|
Discharge Capacitance
|
550 nF
|
|
Modulation Compared to Ground Potential
|
Max. ± 38 V
|
|
Circuit Type
|
Sink
|
|
Switching Delay (Enable 0 → 1, ready for PWM)
|
Max. 100 µs
|
|
Switching Delay (Enable 1 → 0, PWM off)
|
Max. 2.0 ms
|
|
Switching Delay (Rising Edge)
|
52 µs ± 0.5 µs (digitally filtered)
|
|
Switching Delay (Falling Edge)
|
53 µs ± 0.5 µs (digitally filtered)
|
|
Electrical Isolation (Input - Input)
|
No
|
|
Electrical Isolation (Input - ACOPOS)
|
Yes
|
|
Operating Conditions
|
|
|
Operating Temperature (Nominal)
|
5 - 40 °C
|
|
Operating Temperature (Maximum)
|
55 °C
|
|
Storage Temperature
|
- 25 - 55 °C
|
|
Transport Temperature
|
- 25 - 70 °C
|
|
Relative Humidity (Operation)
|
5 - 85%
|
|
Relative Humidity (Storage)
|
5 - 95%
|
|
Relative Humidity (Transport)
|
Max. 95% at 40 °C
|
|
Certifications
|
|
|
CE
|
Yes
|
|
UL
|
cULus E225616 (Power conversion equipment)
|
|
EAC
|
Yes
|
|
KC
|
Yes
|
|
Functional Safety
|
Yes
|
|
Degree of Protection (per EN 60529)
|
IP20
|